|
Die-Line Safety Walkway – 750K & 500K General Information |
|
|
Complete walkway sections with integral kickplates formed as a single unit. |
|
|
|
|
|
|
|
|
|
Safety |
|
High Strength / Mass Ratio |
|
| Die-Line mesh pattern remains superior for real non-skid safety. |
|
| The sections are designed for logitudinal span thus obviating unnecesary steel support and heavy kickplates resulting in better economy. |
|
|
|
Splice Details |
|
Erection |
|
| Transverse loading is transferred to the kickflats which are provided with two slotted holes at each end and positioned around the neutral axis. Pressed angle splice plates fit on the outside and into the returned top edges. M10 bolts and nuts are provided. |
|
| The light sections are easy and safe to erect. |
|
|
|
Long Life |
|
Holding Down |
|
| Clean open sections with no welding or butting surfaces to trap corrosive elements makes them ideal for special protective finishes. |
|
| Where welding is undesirable M* hook bolts or channel bolts to suit transverse supports should be obtained 20mm longer than depth of section to keep fixing below surface. Saddle clamps are provided. |
|
|
|
|
|
|
|
